943 851 858 
Maintenance drills 
Gear-driven transmission G series. 32
- Manual or automatic feed
- Moveable table and fixed head
- Cast iron head, base, and column
- Tempered and ground steel gears
- Base with "T" slots
- Adjustable depth scale and stop
- Tool ejector
- Motor guard
- Emergency stop button
- Rotation direction selection
- Main switch
- Low voltage electrical equipment
- Electrical equipment in independent box
- Bit protector with stop micro switch
- Fixed table
- Gears greased by automatic pump
- CE Standards
ø 32 mm
M 24
1,8 kW
2,6 kW
2,6 kW
CM3
120 mm
ø 100 mm
250 mm
More product information:
| Features | G 32 | GP 32 | |
|---|---|---|---|
| Maximum steel drilling capacity 50/60 | Ø mm | 32 | |
| Maximum steel tapping capacity 50/60 | M | M24 | |
| Morse cone | Nr. | 3 | |
| Maximum spindle travel (drilling depth) | mm | 120 | |
| Main motor power | kw | 1,8 / 2,6 | |
| Transmission | Gears | ||
| Number of speeds | 8 | ||
| Speed range with motor at 1500 rpm 50Hz 3HP | 65-125 185-365-540-1055-1560-3060 | ||
| Feed | Manual | Automatic | |
| Number of automatic feeds | mm | 3 | |
| Automatic feed range | mm/rev | 0,10-0,20-0,30 | |
| Worktable dimensions (LxW) | mm | 270 x 300 | |
| Column diameter | mm | 100 | |
| Distance from the spindle centre to the face of the column | mm | 250 | |
| Net weightWithout and with intermediate table | kg | 360 | |
| Gross weight with packagingWithout and with intermediate table | kg | 2,2 x 0,6 x 0,9 (1,19m2) | |
| Packaging dimensions (length x width x height)Without and with intermediate table | mm | 2310 x 600 x 1100 | |
| Code | |
|---|---|
| 20010 | L - Light equipment |
| 10042 | IR/RS - Automatic rotation inversion for manual tapping |
| 20082 | MG - Rotating table |
| 91118 | ERB - Cooling equipment in base |
Do you want us to call you?
Leave us your information and we will call you to clear up your questions