943 851 858 
Production drills 
Gear-driven transmission SE series. 25-30
- Manual or automatic feed
- Fixed table, moveable and rotating head
- Cast iron head, base, and column
- Tempered and ground steel gears
- Base with "T" slots
- Adjustable depth scale and stop
- Light equipment
- Tool ejector
- Motor guard
- Emergency stop button
- Rotation direction selection
- Main switch
- Low voltage electrical equipment
- Electrical equipment in independent box
- Bit protector with stop micro switch
- Gears greased by automatic pump
- CE Standards
ø 25 mm
ø 30 mm
ø 30 mm
M 22
M 25
M 25
0,8/1,2 kW
1,1/1,4 kW
1,1/1,4 kW
CM3
120 mm
ø 100 mm
250 mm
More product information:
| Features | SE 25 / SEA 25 | SE 30 / SEA 30 | |
|---|---|---|---|
| Maximum steel drilling capacity | Ø mm | 25 | 30 |
| Maximum steel tapping capacity | M | M22 | M25 |
| Morse cone | Nr. | 3 | |
| Maximum spindle travel (drilling depth) | mm | 120 | |
| Main motor power | kw | 0,8/1,2 | 1,1/1,4 |
| Transmission | Gears | ||
| Number of speeds | 8 | ||
| Speed range with motor at 1500 rpm 50Hz 3HP | rpm | 65-125-185-365-540-1055-1560-3060 | |
| Speed range with variator at 1500 rpm 50Hz 3HP | rpm | A)45-125 B)125-370 C)380-1070 D)1100-3100 | |
| Feed | Manual (SE) / Automatic (SEA) | ||
| Number of automatic feeds | 2 (only in SEA models) | ||
| Automatic feed range | mm/rev | 0.1-0.2 (only in SEA models) | |
| Worktable dimensions (LxW) | mm | 270 x 270 | |
| Column diameter | mm | 100 | |
| Distance from the spindle centre to the face of the column | mm | 250 | |
| Net weightWithout and with intermediate table | kg | 200 /240 | |
| Gross weight with packagingWithout and with intermediate table | kg | 210/260 | |
| Packaging dimensions (length x width x height)Without and with intermediate table | mm | 800x600x1450 800x570x1930 |
|
| Code | |
|---|---|
| 10020 | V - Front handwheel for sensitive feed. |
| 10022 | LBC - Digital depth reader |
| 10023 | VE + TAK - Electronic speed variator and digital speed reader |
| 10042 | IR/RS - Automatic rotation inversion for manual tapping |
| 10043 | IR/RS-VE - Automatic rotation inversion for manual tapping (for models with variator) |
| 10082 | PKB - Base cabinet with drawer and door |
| 10083 | PKA - Base cabinet with 2 shelves (only for desktop drills without cooling) |
| 10084 | PKC - Base cabinet with door (only for models with MIF or MIG) |
| 10085 | CC - Cycle counter (for machines with hydroblock) |
| 10087 | MIF - Fixed intermediate table |
| 10088 | MIG - Rotating intermediate table |
| 10110 | SC - 200mm column extension. |
| 10120 | HB - Automatic hydroblock cycle |
| 91118 | ERB - Cooling equipment in base |
| * For machines with intermediate table, the base has no drawer (ref. PKC). |
Do you want us to call you?
Leave us your information and we will call you to clear up your questions