943 851 858 
Milling & Drilling machines 
Gear-driven transmission TF.35
- Automatic feed with electromagnetic clutch
- Coordinates table
- Fixed base and moveable head
- Motorised head movement
- Prismatic column
- Manual grease pump, for guides, column and table
- Adjustable depth stop
- Front handwheel for fine manual feed
- Cooling equipment
- Tool clamp tie rod
- Light equipment
- Main switch
- Emergency stop button
- Rotation direction selection
- Low voltage electrical equipment
- Control panel installed on arm
- Bit protector with stop micro switch
- CE Standards
ø 35 mm
45 cm3
M 35
0,9/1,5 kW
CM4
180 mm
390 mm
More product information:
| Features | TF 35 | ||
|---|---|---|---|
| Maximum steel drilling capacity 50/60 | Ø mm | 35 | |
| Maximum steel tapping capacity 50/60 | M | M35 | |
| Morse cone | Nr. | 4 | |
| Maximum spindle travel (drilling depth) | mm | 180 | |
| Main motor power | kw | 0,9/1,5 | |
| Transmission | Gears | ||
| Number of speeds | 16 | ||
| Speed range with motor at 1500 rpm 50Hz 3HP | rpm | 94-135-189-207-271-303-347-416-497-606-695-760-995-1112-1520-2225 | |
| Speed range with variator at 1500 rpm 50Hz 3HP | rpm | A)152-605 B)223-890 C)559-2236 D)818-3272 | |
| Feed | rpm | Automatic with electromagnetic clutch | |
| Number of automatic feeds | 3 | ||
| Automatic feed range | 0,8-0,18-0,24 | ||
| Longitudinal table movement (X) | mm | 700 | |
| Transversal table movement (Y) | mm | 360 | |
| Distance from the spindle centre to the face of the column | mm | 390 | |
| Net weight | kg | 910 | |
| Gross weight with packaging | kg | 1400 | |
| Packaging dimensions (length x width x height) | mm | 2690 x 1780 x 1780 | |
| Code | |
|---|---|
| 50012 | LBC - Digital depth reader |
| 50020 | IR/RS - Automatic rotation inversion for manual tapping |
| 50035 | RHP - Automatic tapping system with standard spindle (includes one thread pitch) |
| 50038 | HGP_S - Additional standard spindle, special pitch |
| 50070 | HGP - Additional standard spindle, standard pitch |
| 50040 | ENG X - Automatic longitudinal movement by motorised feed box |
| 50080 | ENG Y - Automatic transversal movement by motorised feed box |
| 50089 | LDG 1 - Digital display for 1 axis (on control panel in articulated arm) |
| 50090 | LDG 2 - Digital display for 2 axes (on control panel in articulated arm) |
| 50100 | LDG 3 - Digital display for 3 axes (on control panel in articulated arm) |
| 50120 | PPZ - Collet holder with locking nut, set of collets, wrench, and case |
| 50130 | SC - 200mm column extension. |
| 50140 | ISO 30 - Extension for spindle ISO.30 |
| 50141 | ISO 40 - Extension for spindle ISO.40 |
| 50170 | SAH - Automatic tool holder for ISO taper |
| 50250 | ACNL - Rapid approach and retraction with pneumatic counterweight |
| 50260 | CI - Comprehensive cycle with encoder (only for BX models) |
Do you want us to call you?
Leave us your information and we will call you to clear up your questions