943 851 858 
Production drills 
Gear-driven transmission A series. 40-50
- Automatic feed with mechanical clutch
- Moveable table and fixed head
- Cast iron head, base, and column
- Tempered and ground steel gears
- Front arrangement of the plate and speed selection controls
- Table/base with "T" slots
- Cooling equipment in base
- Adjustable depth scale and stop
- Light equipment
- Front handwheel for fine manual feed
- Tool ejector
- Motor guard
- Emergency stop button
- Rotation direction selection
- Main switch
- Low voltage electrical equipment
- Electrical equipment in independent box
- Bit protector with stop micro switch
- Tiltable rotating table
- Gears greased by automatic pump
- CE Standards
ø 40 mm
ø 50 mm
ø 50 mm
M 33
M 36
M 36
2,2 kW
3 kW
3 kW
CM4
200 mm
230 mm
230 mm
ø 175 mm
ø 200 mm
ø 200 mm
360 mmz
400 mm
400 mm
More product information:
| Features | A 40 | A 50 | |
|---|---|---|---|
| Maximum steel drilling capacity | Ø mm | 40 | 50 |
| Maximum steel tapping capacity | M | M33 | M36 |
| Morse cone | Nr. | 4 | |
| Maximum spindle travel (drilling depth) | mm | 200 | 230 |
| Main motor power | kw | 2,2 Kw | 3 Kw |
| Transmission | Gears | ||
| Number of speeds | 9 | ||
| Speed range with motor at 1500 rpm 50Hz 3HP | 61-85-123-191-269-390-574-806-1169 | 54-75-109-169-237-344-507-712-1032 | |
| Speed range with variator at 1500 rpm 50Hz 3HP | A)30-100 B)65-200 C)45-140 D)95-305 E)156-430 F)200-640 G)290-920 H)410-1290 I)340-1870 |
A)27-86 B)37-120 C)55-175 D)85-270 E)68-380 F)175-550 G)254-810 H)356-1140 I)516-1650 |
|
| Feed | Automatic feed with mechanical clutch | ||
| Number of automatic feeds | 4 | ||
| Automatic feed range | mm/rev | 0,1-0,2-0,3-0,4 | |
| Worktable dimensions (LxW) | mm | 550 x 550 | |
| Column diameter | mm | 175 | 200 |
| Distance from the spindle centre to the face of the column | mm | 360 | 400 |
| Net weight | kg | 610 | 710 |
| Gross weight with packaging | kg | 695 | 795 |
| Packaging dimensions (length x width x height) | mm | 2500 x 600 x 1200 | 2600 x 600 x 1200 |
| Code | |
|---|---|
| 10022 | LBC - Digital depth reader |
| 40045 | VE + TAK - Electronic speed variator and digital speed reader |
| 10042 | IR/RS - Automatic rotation inversion for manual tapping |
| 10043 | IR/RS-VE - Automatic rotation inversion for manual tapping (for models with variator) |
| 30070 | RHP - Automatic tapping system with standard spindle (includes one thread pitch) |
| 40039 | AR - Automatic feeds at 50% standard value |
| 40070 | SC - 200mm column extension. |
Do you want us to call you?
Leave us your information and we will call you to clear up your questions